UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            10620
                        
                            Issued:2002-05-08
                    
                            Revised:2012-03-30
                    
                            Style
                            10620
                        
                            Single conductor cable with non-integral jacket.
                    
			Rating150 deg C, 600 Vac, Cable flame.
		
			Conductor40 AWG minimum.
		
			InsulationLabeled or complying with Manufacture's AWM Procedure.
		
			AssemblyInsulated conductor with optional filler, optional tape, optional covering, optional shield and jacket.
		
			FillersOptional.  Single or mixed fillers consisting of ETFE, PFA, FEP, or Foamed PTFE.
		
			TapeOptional.  ETFE, PFA, FEP or Foamed PTFE.
		
			CoveringOptional. 10 mils or heavier PFA or FEP, or 15 mils or heavier ETFE covering may be extruded over the conductor assembly. Tape(Optional, over fillers) - ETFE, PFA, FEP, or Cellular PTFE.
		
			ShieldOptional.
		
			JacketPFA.
		
			Diameter of cable under jacketMinimum averageMinimum at any point
		
			0.350 inch or less10 mils8 mils
		
			0.351-0.500 inch13 mils10 mils
		
			0.501-0.700 inch15 mils12 mils
		
			0.701-1.500 inch20 mils16 mils
		
			Misc.Fillers - Optional. Single or mixed fillers consisting of ETFE, PFA, FEP, or Cellular PTFE.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external interconnection.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 10620	Issued:2002-05-08
			Revised:2012-03-30


Rating	150 deg C, 600 Vac, Cable flame.

Conductor	40 AWG minimum.

Insulation	Labeled or complying with Manufacture's AWM Procedure.

Assembly	Insulated conductor with optional filler, optional tape, optional covering, optional shield and jacket.

Fillers	Optional. Single or mixed fillers consisting of ETFE, PFA, FEP, or Foamed PTFE.

Tape	Optional. ETFE, PFA, FEP or Foamed PTFE.

Covering	Optional. 10 mils or heavier PFA or FEP, or 15 mils or heavier ETFE covering may be extruded over the conductor assembly. Tape(Optional, over fillers) - ETFE, PFA, FEP, or Cellular PTFE.

Shield	Optional.

Jacket	PFA.
	Diameter of cable under jacket	Minimum average	Minimum at any point
	0.350 inch or less	10 mils	8 mils
	0.351-0.500 inch	13 mils	10 mils
	0.501-0.700 inch	15 mils	12 mils
	0.701-1.500 inch	20 mils	16 mils

Misc.	Fillers - Optional. Single or mixed fillers consisting of ETFE, PFA, FEP, or Cellular PTFE.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external interconnection.