UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            10659
                        
                            Issued:2003-01-27
                    
                            Revised:2012-06-19
                    
                            Style
                            10659
                        
                            Single Conductor, Extruded Insulation and Non-Integral Jacket
                    
			Rating150 deg C, 125 Vac, Horizontal flame.
		
			Conductor27 AWG - 30 AWG consisting of five strands 33-30 AWG., tinned or bare copper.
		
			InsulationETFE, 12 mils min average, 11 mils minimum at any point.
		
			ShieldCopper, Wire Braid, Diameter of strands 3.7 mils, Number of ends-4, Number of carriers-16, Picks per inch-32, Percent Coverage-100%.
		
			JacketETFE, 6 mils min average, 5 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of Heating Leads.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 10659	Issued:2003-01-27
			Revised:2012-06-19


Rating	150 deg C, 125 Vac, Horizontal flame.

Conductor	27 AWG - 30 AWG consisting of five strands 33-30 AWG., tinned or bare copper.

Insulation	ETFE, 12 mils min average, 11 mils minimum at any point.

Shield	Copper, Wire Braid, Diameter of strands 3.7 mils, Number of ends-4, Number of carriers-16, Picks per inch-32, Percent Coverage-100%.

Jacket	ETFE, 6 mils min average, 5 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of Heating Leads.