UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            10717
                        
                            Issued:2003-08-20
                    
                            Revised:2012-04-01
                    
                            Style
                            10717
                        
                            Single conductor with extruded insulation
                    
			Rating105 deg C, 150 Vac, Horizontal flame.
		
			ConductorInner Conductor - 24 AWG (4 conductor strands, 10.0 mil strand diameter, 0.5 inches lay of strands). Heater Conductor - 41 AWG - 34 AWG solid, tinned or bare copper.
		
			InsulationInner Insulating Covering, Separation Sensor Layer - PVC or PE, 14 mils minimum average thickness, 13 mils minimum thickness at any point, 25 mils core diameter. Not evaluated as a Sensor Layer. Outer Insulation - PVC, 25 mils min average, 22 mils minimum at any point.
		
			AssemblyThe core with inner conductor, inner insulation, heater conductor(70 -13 turns per inch), then outer insulation.
		
			Misc.Core - Tinsel wire fibre core, 4 wires.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring, High Resistance Heater WireSee facing page for special features.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 10717	Issued:2003-08-20
			Revised:2012-04-01


Rating	105 deg C, 150 Vac, Horizontal flame.

Conductor	Inner Conductor - 24 AWG (4 conductor strands, 10.0 mil strand diameter, 0.5 inches lay of strands). Heater Conductor - 41 AWG - 34 AWG solid, tinned or bare copper.

Insulation	Inner Insulating Covering, Separation Sensor Layer - PVC or PE, 14 mils minimum average thickness, 13 mils minimum thickness at any point, 25 mils core diameter. Not evaluated as a Sensor Layer. Outer Insulation - PVC, 25 mils min average, 22 mils minimum at any point.

Assembly	The core with inner conductor, inner insulation, heater conductor(70 -13 turns per inch), then outer insulation.

Misc.	Core - Tinsel wire fibre core, 4 wires.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring, High Resistance Heater WireSee facing page for special features.