UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            10729
                        
                            Issued:2003-09-26
                    
                            Revised:2019-11-07
                    
                            Style
                            10729
                        
                            Single conductor cable using extruded non-integral jacket
                    
			Rating80 deg C, 30 Vac, Horizontal flame.
		
			Conductor36 AWG - 2000 kcmil, solid or stranded.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyOne insulated conductor to form a round or flat cable. Assembly Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid, paper, nylon, oriented polyethylene terephthalate; thermoplastic covering, thermoplastic-tape wrap.
		
			ShieldOptional.
		
			CoveringOptional, extruded PVC or other thermoplastic covering may be extruded over the conductor assembly (with or without shields), 4 mil minimum average thickness.
		
			JacketExtruded TPU
		
			major dia in inches
		
			0.350 or less15 mils min average12 mils min at any point
		
			0.351-0.700 dia3024
		
			0.701-1.000 dia4036
		
			1.101-1.500 dia5448
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 10729	Issued:2003-09-26
			Revised:2019-11-07


Rating	80 deg C, 30 Vac, Horizontal flame.

Conductor	36 AWG - 2000 kcmil, solid or stranded.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	One insulated conductor to form a round or flat cable. Assembly Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid, paper, nylon, oriented polyethylene terephthalate; thermoplastic covering, thermoplastic-tape wrap.

Shield	Optional.

Covering	Optional, extruded PVC or other thermoplastic covering may be extruded over the conductor assembly (with or without shields), 4 mil minimum average thickness.

Jacket	Extruded TPU
	major dia in inches
	0.350 or less	15 mils min average	12 mils min at any point
	0.351-0.700 dia	30	24
	0.701-1.000 dia	40	36
	1.101-1.500 dia	54	48

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.