UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            10730
                        
                            Issued:2003-09-26
                    
                            Revised:2012-06-06
                    
                            Style
                            10730
                        
                            Single Conductor Cable with Extruded Non-Integral Jacket
                    
			Rating80 deg C, 300 Vac, Horizontal flame.
		
			Conductor36 AWG min., solid or stranded.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyOne insulated conductor to form a round or flat cable. Fillers, optional. A barrier layer, if employed, may be a fibrous wrap serving, or braid, paper, nylon, oriented polyethylene terephthalate; thermoplastic covering, thermoplastic-tape wrap.
		
			CoveringOptional.
		
			ShieldOptional.
		
			JacketExtruded TPU.
		
			Diameter of cable under jacket@Minimum average thicknessMinimum thickness at any point
		
			0.350 inch or less15 mils12 mils
		
			0.351-0.700 inch30 mils24 mils
		
			0.701-1.000 inch40 mils36 mils
		
			1.101-1.500 inch54 mils48 mils
		
			@ - Major diameter if cable is flat or oval.
		
			BraidOptional.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 1	Page 10730	Issued:2003-09-26
			Revised:2012-06-06


Rating	80 deg C, 300 Vac, Horizontal flame.

Conductor	36 AWG min., solid or stranded.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	One insulated conductor to form a round or flat cable. Fillers, optional. A barrier layer, if employed, may be a fibrous wrap serving, or braid, paper, nylon, oriented polyethylene terephthalate; thermoplastic covering, thermoplastic-tape wrap.

Covering	Optional.

Shield	Optional.

Jacket	Extruded TPU.
	Diameter of cable under jacket@	Minimum average thickness	Minimum thickness at any point
	0.350 inch or less	15 mils	12 mils
	0.351-0.700 inch	30 mils	24 mils
	0.701-1.000 inch	40 mils	36 mils
	1.101-1.500 inch	54 mils	48 mils
	@ - Major diameter if cable is flat or oval.

Braid	Optional.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.