UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            10732
                        
                            Issued:2003-09-26
                    
                            Revised:2019-11-07
                    
                            Style
                            10732
                        
                            Single conductor cable using non-integral jacket.
                    
			Rating105 deg C, 30 Vac, Horizontal flame.
		
			Conductor36 AWG min., solid round or flat, tinned or bare copper.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyOne individually insulated conductor to form a round or flat cable. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the individual conductor.
		
			ShieldOptional.
		
			CoveringOptional.
		
			JacketTPE
		
			major dia in inches
		
			0.350 or less15 mils min average12 mils minimum at any point
		
			0.351-0.700 dia30 avg24 min
		
			0.701-1.000 dia40 avg36 min
		
			1.101-1.500 dia54 avg48 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 10732	Issued:2003-09-26
			Revised:2019-11-07


Rating	105 deg C, 30 Vac, Horizontal flame.

Conductor	36 AWG min., solid round or flat, tinned or bare copper.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	One individually insulated conductor to form a round or flat cable. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the individual conductor.

Shield	Optional.

Covering	Optional.

Jacket	TPE
	major dia in inches
	0.350 or less	15 mils min average	12 mils minimum at any point
	0.351-0.700 dia	30 avg	24 min
	0.701-1.000 dia	40 avg	36 min
	1.101-1.500 dia	54 avg	48 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.