UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            10734
                        
                            Issued:2003-09-26
                    
                            Revised:2011-08-01
                    
                            Style
                            10734
                        
                            Single Conductor with Extruded Insulation and Jacket
                    
			Rating105 deg C, 600 Vac, Horizontal flame.
		
			Conductor36 AWG minimum, solid or stranded
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyFillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the individual conductor.
		
			ShieldOptional
		
			JacketExtruded TPE
		
			Diameter Under Jacket - Major Diameter if Flat (inch)Minimum average thickness (mils)Minimum thickness at any point (mils)
		
			0.350 or less1512
		
			0.351-0.7003024
		
			0.701-1.0004036
		
			1.101-1.5005448
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral
		
			UseInternal wiring
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 10734	Issued:2003-09-26
			Revised:2011-08-01


Rating	105 deg C, 600 Vac, Horizontal flame.

Conductor	36 AWG minimum, solid or stranded

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the individual conductor.

Shield	Optional

Jacket	Extruded TPE
	Diameter Under Jacket - Major Diameter if Flat (inch)	Minimum average thickness (mils)	Minimum thickness at any point (mils)
	0.350 or less	15	12
	0.351-0.700	30	24
	0.701-1.000	40	36
	1.101-1.500	54	48

Standard	Appliance Wiring Material UL 758.

Marking	General

Use	Internal wiring