UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            10767
                        
                            Issued:2003-12-11
                    
                            Revised:2011-10-30
                    
                            Style
                            10767
                        
                            Multiconductor Cable with Extruded Non-Integral Jacket.
                    
			Rating60 deg C, 30 Vac, Horizontal flame.
		
			Conductor40 AWG min. solid or stranded round, tinned or bare copper.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure, having a minimum rating of 60°C, 30 V.
		
			CoveringOptional. Extruded PVC 6 mil or heavier.
		
			ShieldRequired.
		
			JacketExtruded FRPE.
		
			Dia of Cable Thickness Under Jkt(In)Min. Average Jkt Thickness (Mils)Min. Jkt Thickness At any point (Mils)
		
			0.350 or less1512
		
			0.351 - 0.7003024
		
			0.701 - 1.004036
		
			1.001 - 1.5005448
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 10767	Issued:2003-12-11
			Revised:2011-10-30


Rating	60 deg C, 30 Vac, Horizontal flame.

Conductor	40 AWG min. solid or stranded round, tinned or bare copper.

Insulation	Labeled or complying with Manufacturer's AWM Procedure, having a minimum rating of 60°C, 30 V.

Covering	Optional. Extruded PVC 6 mil or heavier.

Shield	Required.

Jacket	Extruded FRPE.
	Dia of Cable Thickness Under Jkt(In)	Min. Average Jkt Thickness (Mils)	Min. Jkt Thickness At any point (Mils)
	0.350 or less	15	12
	0.351 - 0.700	30	24
	0.701 - 1.00	40	36
	1.001 - 1.500	54	48

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.