UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1079
                        
                            Issued:1959-05-01
                    
                            Revised:2011-08-22
                    
                            Style
                            1079
                        
                            Single conductor with extruded insulation.
                    
			Rating90 deg C, 300 Vac, Horizontal flame.
		
			ConductorMinimum 0.0025 inch diameter resistance wire wound for a minimum 20 turns per inch on a Rayon, Cotton, Polyester or Fiberglass yarn core.
		
			InsulationExtruded PVC, 31 mils minimum average thickness, 27 mils minimum thickness at any point.
		
			CoveringExtruded Nylon, 2 mils minimum thickness.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring of Electric Refrigerators where exposed to temperatures not exceeding 90 deg C and where not subjected to flexing or motion.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 1079	Issued:1959-05-01
			Revised:2011-08-22


Rating	90 deg C, 300 Vac, Horizontal flame.

Conductor	Minimum 0.0025 inch diameter resistance wire wound for a minimum 20 turns per inch on a Rayon, Cotton, Polyester or Fiberglass yarn core.

Insulation	Extruded PVC, 31 mils minimum average thickness, 27 mils minimum thickness at any point.

Covering	Extruded Nylon, 2 mils minimum thickness.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring of Electric Refrigerators where exposed to temperatures not exceeding 90 deg C and where not subjected to flexing or motion.