UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            10792
                        
                            Issued:2003-11-25
                    
                            Revised:2011-10-03
                    
                            Style
                            10792
                        
                            Single insulation with extruded Non-integral Jacket
                    
			Rating150 deg C, 2000 Vac, Horizontal flame, Optional - Oil Resistant 80 deg C, Gasoline Res
		
			Conductor50 AWG - 14 AWG solid or stranded, solid magnet wire or Litz cable magnet wire, R/C (OBMW2), magnet wire. AWG size to be determined by the Resistance Test per UL 1581.
		
			InsulationExtruded PFA, 15 mils min average, 13 mils minimum at any point.
		
			AssemblyEach single magnet wire strand is cabled together with other magnet wire strands to form a conductor.
		
			ShieldOptional.
		
			CoveringOptional. FEP, PFA, 0.005 in. or heavier or PTFE (extruded or tape wrapped) 0.005 in. or heavier.
		
			BraidOptional. silicone impregnated glass braid 0.015 in. thick.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral. "Litz conductors are manufactured using solderable magnet wire."
		
			UseInternal Wiring of Appliances. In addition the tag may also indicate the following: Suitable for immersion in gasoline; gasoline vapor; 80 deg C in oil; and/or 600 V Peak for electronic use only. Wires employing Litz conductors shall be plainly marked on the tag or reel as follows: "Litz conductors are manufactured using solderable magnet wire."
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 1	Page 10792	Issued:2003-11-25
			Revised:2011-10-03


Rating	150 deg C, 2000 Vac, Horizontal flame, Optional - Oil Resistant 80 deg C, Gasoline Res

Conductor	50 AWG - 14 AWG solid or stranded, solid magnet wire or Litz cable magnet wire, R/C (OBMW2), magnet wire. AWG size to be determined by the Resistance Test per UL 1581.

Insulation	Extruded PFA, 15 mils min average, 13 mils minimum at any point.

Assembly	Each single magnet wire strand is cabled together with other magnet wire strands to form a conductor.

Shield	Optional.

Covering	Optional. FEP, PFA, 0.005 in. or heavier or PTFE (extruded or tape wrapped) 0.005 in. or heavier.

Braid	Optional. silicone impregnated glass braid 0.015 in. thick.

Standard	Appliance Wiring Material UL 758.

Marking	General. "Litz conductors are manufactured using solderable magnet wire."

Use	Internal Wiring of Appliances. In addition the tag may also indicate the following: Suitable for immersion in gasoline; gasoline vapor; 80 deg C in oil; and/or 600 V Peak for electronic use only. Wires employing Litz conductors shall be plainly marked on the tag or reel as follows: "Litz conductors are manufactured using solderable magnet wire."