UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            10805
                        
                            Issued:2003-11-28
                    
                            Revised:2011-10-30
                    
                            Style
                            10805
                        
                            Multiconductor Cable with Extruded Non-Integral Jacket.
                    
			Rating80 deg C, 600 Vac, Horizontal flame, Cable flame.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure. Singles must be rated minimum 80ºC and 600 V.
		
			CoveringOptional.
		
			ShieldOptional.
		
			JacketExtruded FRPE.
		
			THICKNESS OF PVC JACKET (mils)
		
			Dia. of Cable Under Jacket in Inches, Minimum Average, Minimum at any point; 0.700 or less, 30, 24; 0.701 - 1.000, 45, 36; 1.001 - 1.500, 60, 48; 1.501 - 2.500, 80, 64## Equivalent diameter of flat assembly = 1.1284 x (TW)0.5, where T is the thickness of the assembly under jacket, and W is the width of the assembly under jacket.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring and external interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 10805	Issued:2003-11-28
			Revised:2011-10-30


Rating	80 deg C, 600 Vac, Horizontal flame, Cable flame.

Insulation	Labeled or complying with manufacturer's AWM Procedure. Singles must be rated minimum 80ºC and 600 V.

Covering	Optional.

Shield	Optional.

Jacket	Extruded FRPE.
	THICKNESS OF PVC JACKET (mils)

	Dia. of Cable Under Jacket in Inches, Minimum Average, Minimum at any point; 0.700 or less, 30, 24; 0.701 - 1.000, 45, 36; 1.001 - 1.500, 60, 48; 1.501 - 2.500, 80, 64## Equivalent diameter of flat assembly = 1.1284 x (TW)0.5, where T is the thickness of the assembly under jacket, and W is the width of the assembly under jacket.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring and external interconnection of electronic equipment.