UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            10812
                        
                            Issued:2003-12-18
                    
                            Revised:2011-11-10
                    
                            Style
                            10812
                        
                            Single conductor with extruded insulation
                    
			Rating105 deg C, 125 Vac, Horizontal flame.
		
			Conductor39 - 31 AWG Resistance Wire. Copper, nickel-alloy, or stainless steel. Sensor Wire - 40-35 AWG, same material as the conductor wrapped over sensor layer.
		
			AssemblyConductor wound 10 turns per inch min 70 turns per max. On a core of Acrylic, Fiberglass, Polyester or Rayon. Core may be coated with Silicone Rubber. Sensor Wire - wound 10 turns per inch min 70 turns per max. A conductor core with sensor layer, sensor wire and insulation.
		
			Sensor LayerExtruded PVC. 14 mils minimum average thickness, 12 mils minimum thickness at any point.
		
			InsulationExtruded PVC. 17 mils minimum average thickness, 15 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseHigh Resistance Heater Wire.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 1	Page 10812	Issued:2003-12-18
			Revised:2011-11-10


Rating	105 deg C, 125 Vac, Horizontal flame.

Conductor	39 - 31 AWG Resistance Wire. Copper, nickel-alloy, or stainless steel. Sensor Wire - 40-35 AWG, same material as the conductor wrapped over sensor layer.

Assembly	Conductor wound 10 turns per inch min 70 turns per max. On a core of Acrylic, Fiberglass, Polyester or Rayon. Core may be coated with Silicone Rubber. Sensor Wire - wound 10 turns per inch min 70 turns per max. A conductor core with sensor layer, sensor wire and insulation.

Sensor Layer	Extruded PVC. 14 mils minimum average thickness, 12 mils minimum thickness at any point.

Insulation	Extruded PVC. 17 mils minimum average thickness, 15 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	High Resistance Heater Wire.