UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            10837
                        
                            Issued:2004-01-26
                    
                            Revised:2011-09-30
                    
                            Style
                            10837
                        
                            Single Conductor with Extruded Insulation.
                    
			Rating105 deg C, 150 Vac, Horizontal flame.
		
			ConductorHeater conductor - 40 - 34 AWG solid conductor  spirally wound over a fiber core. (60 - 15) turns per inch). Sensor Layer - PE, 14 mils minimum average thickness, 12 mils minimum thickness at any point. Not Evaluated as a Sensor Layer. Sensor wire - 41-34 AWG solid.
		
			Sensor LayerExtruded PE, 14 mils min average, 12 mils minimum at any point. Not Evaluated as a Sensor Layer.
		
			AssemblyA conductor spirally wound over a fiber core(60 - 15) turns per inch, then with a sensor layer and sensor wire spirally wound over at (70 - 10) turns per inch, then outer insulation.
		
			InsulationExtruded PVC, 20 mils min average, 18 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.  High Resistance Heater Wire.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 1	Page 10837	Issued:2004-01-26
			Revised:2011-09-30


Rating	105 deg C, 150 Vac, Horizontal flame.

Conductor	Heater conductor - 40 - 34 AWG solid conductor spirally wound over a fiber core. (60 - 15) turns per inch). Sensor Layer - PE, 14 mils minimum average thickness, 12 mils minimum thickness at any point. Not Evaluated as a Sensor Layer. Sensor wire - 41-34 AWG solid.

Sensor Layer	Extruded PE, 14 mils min average, 12 mils minimum at any point. Not Evaluated as a Sensor Layer.

Assembly	A conductor spirally wound over a fiber core(60 - 15) turns per inch, then with a sensor layer and sensor wire spirally wound over at (70 - 10) turns per inch, then outer insulation.

Insulation	Extruded PVC, 20 mils min average, 18 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring. High Resistance Heater Wire.