UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1104
                        
                            Issued:1959-05-01
                    
                            Revised:2011-12-02
                    
                            Style
                            1104
                        
                            Single conductor with extruded insulation.
                    
			Rating60 deg C, 125 Vac, Horizontal flame.
		
			ConductorA copper alloy or hard drawn copper conductor, 5 mils nominal (4.6 mils minimum) diameter shall be wound spirally for a minimum of 35 turns per inch on a Rayon, Cotton, Polyester, Fiberglass or Nylon (Polyamide) yarn core.
		
			InsulationExtruded PVC, 20 mils minimum average thickness, 18 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 1	Page 1104	Issued:1959-05-01
			Revised:2011-12-02


Rating	60 deg C, 125 Vac, Horizontal flame.

Conductor	A copper alloy or hard drawn copper conductor, 5 mils nominal (4.6 mils minimum) diameter shall be wound spirally for a minimum of 35 turns per inch on a Rayon, Cotton, Polyester, Fiberglass or Nylon (Polyamide) yarn core.

Insulation	Extruded PVC, 20 mils minimum average thickness, 18 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.