UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            11042
                        
                            Issued:2006-08-18
                    
                            Revised:2011-10-17
                    
                            Style
                            11042
                        
                            Single-conductor cable using non-integral jacket
                    
			Rating105 deg C, 30 Vac, Cable flame.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure having minimum rating of 105 deg C, 30 Vac.
		
			CoveringOptional.
		
			ShieldOptional.
		
			JacketmPPE.
		
			dia of assembly under jacket*Minimum averageMinimum at any point
		
			0.700 inch or less9 mils7 mils
		
			0.701-1.500 inch10 mils8 mils
		
			*Equivalent diameter of flat assembly = 1.1284 x (TW)0.5 where T is the thickness of the assembly under jacket, and W is the width of the assembly under jacket.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring and external wiring in Class 2 circuits.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 11042	Issued:2006-08-18
			Revised:2011-10-17


Rating	105 deg C, 30 Vac, Cable flame.

Insulation	Labeled or complying with manufacturer's AWM Procedure having minimum rating of 105 deg C, 30 Vac.

Covering	Optional.

Shield	Optional.

Jacket	mPPE.
	dia of assembly under jacket*	Minimum average	Minimum at any point
	0.700 inch or less	9 mils	7 mils
	0.701-1.500 inch	10 mils	8 mils
	*Equivalent diameter of flat assembly = 1.1284 x (TW)0.5 where T is the thickness of the assembly under jacket, and W is the width of the assembly under jacket.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring and external wiring in Class 2 circuits.