UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            11057
                        
                            Issued:2006-08-14
                    
                            Revised:2012-04-16
                    
                            Style
                            11057
                        
                            Single conductor with extruded and other-than-extruded insulations.
                    
			Rating90 deg C, 150 Vac, Horizontal flame. Optional -  Oil Resistant 60 deg C.
		
			Conductor32 AWG - 20 AWG, solid or stranded.
		
			InsulationNominal 6-Mil wall "FEP" extrusion 5-mil minimum at any point and over this a laminated oriented polyethylene terephthalate tape with polyester or PVC adhesive in nom. 7.0-mil wall and min. 5.5-mil wall in the form of a spiral wrap bonded together.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring. Tag may state: "where exposed to oil not exceeding 60 deg C".
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 1	Page 11057	Issued:2006-08-14
			Revised:2012-04-16


Rating	90 deg C, 150 Vac, Horizontal flame. Optional - Oil Resistant 60 deg C.

Conductor	32 AWG - 20 AWG, solid or stranded.

Insulation	Nominal 6-Mil wall "FEP" extrusion 5-mil minimum at any point and over this a laminated oriented polyethylene terephthalate tape with polyester or PVC adhesive in nom. 7.0-mil wall and min. 5.5-mil wall in the form of a spiral wrap bonded together.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring. Tag may state: "where exposed to oil not exceeding 60 deg C".