UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            11163
                        
                            Issued:2008-08-22
                    
                            Revised:2011-10-03
                    
                            Style
                            11163
                        
                            Single insulation with extruded Non-integral Jacket
                    
			Rating105 deg C, 90 Vac, Horizontal flame.
		
			Conductor36 AWG - 16 AWG min. solid or stranded round.
		
			InsulationExtruded FEP, consists of an inner tube and an outer tube joined together by webs.  Overall 6 mils minimum average thickness and 5 mils minimum at any point, including air gap between the tubes.  Individual tube and web 1 mil minimum at any point.
		
			ShieldOptional.
		
			JacketExtruded PVC, 2 mils minimum average thickness, 1 mil minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 11163	Issued:2008-08-22
			Revised:2011-10-03


Rating	105 deg C, 90 Vac, Horizontal flame.

Conductor	36 AWG - 16 AWG min. solid or stranded round.

Insulation	Extruded FEP, consists of an inner tube and an outer tube joined together by webs. Overall 6 mils minimum average thickness and 5 mils minimum at any point, including air gap between the tubes. Individual tube and web 1 mil minimum at any point.

Shield	Optional.

Jacket	Extruded PVC, 2 mils minimum average thickness, 1 mil minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.