UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            11206
                        
                            Issued:2009-07-09
                    
                            Revised:2011-10-13
                    
                            Style
                            11206
                        
                            Single conductor with extruded insulation
                    
			Rating90 deg C, 125 Vac, Horizontal flame.
		
			Conductor39-31 AWG.
		
			InsulationExtruded PVC, 18 mils minimum average thickness, 16 mils minimum thickness at any point.
		
			CoveringExtruded PVC, extruded PE or extruded Nylon, provided over Conductor.
		
			Misc.Sensor Wire - 40-35 AWG, copper, nickel-alloy, or stainless steel, wound around Covering.
		
			AssemblyConductor wound around a core of Acrylic, Fiberglass, Polyester or Rayon, with 10 turns per inch minimum and 70 turns per inch maximum, core may be coated with Silicone Rubber.  Conductor covered by Covering.  Sensor Wire wound around Covering, with 10 turns per inch minimum and 70 turns per inch maximum, covered by Insulation.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 11206	Issued:2009-07-09
			Revised:2011-10-13


Rating	90 deg C, 125 Vac, Horizontal flame.

Conductor	39-31 AWG.

Insulation	Extruded PVC, 18 mils minimum average thickness, 16 mils minimum thickness at any point.

Covering	Extruded PVC, extruded PE or extruded Nylon, provided over Conductor.

Misc.	Sensor Wire - 40-35 AWG, copper, nickel-alloy, or stainless steel, wound around Covering.

Assembly	Conductor wound around a core of Acrylic, Fiberglass, Polyester or Rayon, with 10 turns per inch minimum and 70 turns per inch maximum, core may be coated with Silicone Rubber. Conductor covered by Covering. Sensor Wire wound around Covering, with 10 turns per inch minimum and 70 turns per inch maximum, covered by Insulation.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.