UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            11352
                        
                            Issued:2011-09-26
                    
                            Revised:2015-06-21
                    
                            Style
                            11352
                        
                            Single Conductor with Extruded Non-Integral Jacket
                    
			Rating80 deg C,30 Vac, Cable flame, VW-1 flame.
		
			Insulated ConductorLabeled or complying with manufacturer's AWM Procedure having a minimum rating of 80 deg C and 30 V.
		
			ShieldOptional.
		
			CoveringOptional for one layer jacket. None for two layers jacket.
		
			JacketPVC. One layer or two layers jacket, thickness in accordance with the table below. Two layers jacket are extruded simultaneously and not separable in the same base compound, but should be differed with colour. The thickness of individual layer is not specified. 

One layer jacket Thickness (mils) or two layers total thickness (mils)
		
			Dia. of assembly under jacket in inchesminimum average thicknessminimum thickness at any point
		
			0 - 0.40024 mils20 mils
		
			0.401 - 0.70030 mils24 mils
		
			0.701 - 1.50045 mils36 mils
		
			1.501 - 2.50060 mils48 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 11352	Issued:2011-09-26
			Revised:2015-06-21


Rating	80 deg C,30 Vac, Cable flame, VW-1 flame.

Insulated Conductor	Labeled or complying with manufacturer's AWM Procedure having a minimum rating of 80 deg C and 30 V.

Shield	Optional.

Covering	Optional for one layer jacket. None for two layers jacket.

Jacket	PVC. One layer or two layers jacket, thickness in accordance with the table below. Two layers jacket are extruded simultaneously and not separable in the same base compound, but should be differed with colour. The thickness of individual layer is not specified. One layer jacket Thickness (mils) or two layers total thickness (mils)
	Dia. of assembly under jacket in inches	minimum average thickness	minimum thickness at any point
	0 - 0.400	24 mils	20 mils
	0.401 - 0.700	30 mils	24 mils
	0.701 - 1.500	45 mils	36 mils
	1.501 - 2.500	60 mils	48 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring.