UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            11392
                        
                            Issued:2012-01-12
                    
                            Revised:2012-01-31
                    
                            Style
                            11392
                        
                            Single-conductor cable using non-integral jacket.
                    
			Rating90 deg C, 300 Vac, Horizontal flame, Optional - Sunlight resistant
		
			Conductor10 AWG - 500 kcmil, solid or stranded.
		
			InsulationExtruded FRPE.
		
			Conductor sizeMinimum averageMinimum at any point
		
			10-5 AWG30 mils27 mils
		
			4-2 AWG45 mils41 mils
		
			1-2/0 AWG55 mils49 mils
		
			3/0 AWG-250 kcmil60 mils54 mils
		
			500 kcmil80 mils72 mils
		
			ShieldOptional.
		
			JacketExtruded FRPE.
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.250 inch or less8 mils6 mils
		
			0.251-0.350 inch10 mils8 mils
		
			0.351-0.500 inch13 mils10 mils
		
			0.501-0.700 inch15 mils12 mils
		
			0.701-1.500 inch20 mils16 mils
		
			1.501-2.500 inch30 mils24 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 1	Page 11392	Issued:2012-01-12
			Revised:2012-01-31


Rating	90 deg C, 300 Vac, Horizontal flame, Optional - Sunlight resistant

Conductor	10 AWG - 500 kcmil, solid or stranded.

Insulation	Extruded FRPE.
	Conductor size	Minimum average	Minimum at any point
	10-5 AWG	30 mils	27 mils
	4-2 AWG	45 mils	41 mils
	1-2/0 AWG	55 mils	49 mils
	3/0 AWG-250 kcmil	60 mils	54 mils
	500 kcmil	80 mils	72 mils

Shield	Optional.

Jacket	Extruded FRPE.
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.250 inch or less	8 mils	6 mils
	0.251-0.350 inch	10 mils	8 mils
	0.351-0.500 inch	13 mils	10 mils
	0.501-0.700 inch	15 mils	12 mils
	0.701-1.500 inch	20 mils	16 mils
	1.501-2.500 inch	30 mils	24 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.