UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1145
                        
                            Issued:1959-05-01
                    
                            Revised:2011-07-28
                    
                            Style
                            1145
                        
                            Single Conductor with extruded insulation
                    
			Rating75 deg C, 125 Vac, Horizontal flame.
		
			ConductorA copper alloy heater wire shall be flattened to a width of 13 to 19 mils and wrapped spirally for a minimum of 36 turns per inch on a glass yarn core. The core and conductor are then insulated with two extruded walls of nylon (avg. thickness of first wall, 6 mils; avg. thickness of second wall, 5 mils). Over the nylon a copper alloy signal wire, flattened to a width of 13 to 19 mils, shall be wrapped spirally for a minimum of 20 turns per inch.
		
			InsulationPVC, 20 mils min average, 18 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseIn Electrically Heated Blankets where exposed to temperatures not exceeding 75 deg C.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 1145	Issued:1959-05-01
			Revised:2011-07-28


Rating	75 deg C, 125 Vac, Horizontal flame.

Conductor	A copper alloy heater wire shall be flattened to a width of 13 to 19 mils and wrapped spirally for a minimum of 36 turns per inch on a glass yarn core. The core and conductor are then insulated with two extruded walls of nylon (avg. thickness of first wall, 6 mils; avg. thickness of second wall, 5 mils). Over the nylon a copper alloy signal wire, flattened to a width of 13 to 19 mils, shall be wrapped spirally for a minimum of 20 turns per inch.

Insulation	PVC, 20 mils min average, 18 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	In Electrically Heated Blankets where exposed to temperatures not exceeding 75 deg C.