UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            11533
                        
                            Issued:2013-10-24
                    
                            Revised:2013-10-25
                    
                            Style
                            11533
                        
                            Single conductor with extruded insulation
                    
			Rating80 deg C, 300 Vac, Horizontal Flame.
		
			Conductor30 AWG - 10 AWG, Solid or Stranded or A magnet wire conductor, R/C (OBMW2) shall consist of an enameled single conductor or an assembly of individually enameled wires which may be assembled or twisted together with an overall covering of film fiber, tape, or extruded compound to form a Litz wire. Each single magnet wire strand is cabled together with the other magnet wire strands to form a conductor.
		
			SeparatorOptional.  Paper.
		
			InsulationExtruded FRPE, 7 mils minimum average thickness, 6 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring where not subject to mechanical abuse.  Tags may also indicate the following: 600 V peak for electronic use only.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 11533	Issued:2013-10-24
			Revised:2013-10-25


Rating	80 deg C, 300 Vac, Horizontal Flame.

Conductor	30 AWG - 10 AWG, Solid or Stranded or A magnet wire conductor, R/C (OBMW2) shall consist of an enameled single conductor or an assembly of individually enameled wires which may be assembled or twisted together with an overall covering of film fiber, tape, or extruded compound to form a Litz wire. Each single magnet wire strand is cabled together with the other magnet wire strands to form a conductor.

Separator	Optional. Paper.

Insulation	Extruded FRPE, 7 mils minimum average thickness, 6 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring where not subject to mechanical abuse. Tags may also indicate the following: 600 V peak for electronic use only.