UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            11536
                        
                            Issued:2013-12-27
                    
                            Revised:New
                    
                            Style
                            11536
                        
                            Single Conductor with Extruded Non-Intergral Jacket
                    
			Rating60, 80 deg C,30 Vac, Horizontal flame.
		
			Conductor50 AWG - 25 AWG, solid or stranded.
		
			AssemblyInsulated conductor with optional inner covering, optional inner shield, optional middle covering, required outer shield and required outer Jacket.
		
			InsulationExtruded FEP or PFA, 2 mils minimum average thickness, 1 mils minimum thickness at any point. or Extruded PE, 6 mils minimum average thickness, 5 mils minimum at any point. or Extruded PP, 3 mils minimum average thickness, 2 mils minimum at any point.
		
			Inner CoveringOptional - Extruded FEP.  Thicknesses not specified.
		
			Middle CoveringOptional - Extruded FEP or PETP film.  Thicknesses not specified.
		
			Outer ShieldRequired.  Metallic shied.
		
			JacketExtruded TPU, 4 mils minimum average thickness, 3 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025


Rating	60, 80 deg C,30 Vac, Horizontal flame.

Conductor	50 AWG - 25 AWG, solid or stranded.

Assembly	Insulated conductor with optional inner covering, optional inner shield, optional middle covering, required outer shield and required outer Jacket.

Insulation	Extruded FEP or PFA, 2 mils minimum average thickness, 1 mils minimum thickness at any point. or Extruded PE, 6 mils minimum average thickness, 5 mils minimum at any point. or Extruded PP, 3 mils minimum average thickness, 2 mils minimum at any point.

Inner Covering	Optional - Extruded FEP. Thicknesses not specified.

Middle Covering	Optional - Extruded FEP or PETP film. Thicknesses not specified.

Outer Shield	Required. Metallic shied.

Jacket	Extruded TPU, 4 mils minimum average thickness, 3 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.