UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            11538
                        
                            Issued:2014-01-22
                    
                            Revised:2014-02-28
                    
                            Style
                            11538
                        
                            Single Conductor with Extruded Insulation
                    
			Rating90 deg C, 1000 Vac, Horizontal flame.
		
			Conductor50 AWG - 4/0 AWG, solid or stranded.
		
			Conductor AssemblyThe conductor consists of 1-7 individual rope lay stranded members.  Each rope member is comprised of 1-7 bunch lay stranded copper conductor members. The members shall be laid together and wrapped with tape. Textile fillers may be included in the assembly.  

			SeparatorTape shall be applied over the conductor assembly.
		
			InsulationExtruded TPE, 30 mils minimum average thickness, 27 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 11538	Issued:2014-01-22
			Revised:2014-02-28


Rating	90 deg C, 1000 Vac, Horizontal flame.

Conductor	50 AWG - 4/0 AWG, solid or stranded.

Conductor Assembly	The conductor consists of 1-7 individual rope lay stranded members. Each rope member is comprised of 1-7 bunch lay stranded copper conductor members. The members shall be laid together and wrapped with tape. Textile fillers may be included in the assembly.

Separator	Tape shall be applied over the conductor assembly.

Insulation	Extruded TPE, 30 mils minimum average thickness, 27 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.