UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1155
                        
                            Issued:1959-05-01
                    
                            Revised:2012-01-11
                    
                            Style
                            1155
                        
                            Single Conductor with Extruded Insulation
                    
			Rating75 deg C, 125 Vac, Horizontal flame.
		
			ConductorNominal 5 mils resistance wire.  Shall be flattened and then wound spirally for a minimum of 60 turns per inch on a Polyester, Nylon, Fiberglass, Cotton or Rayon yarn core.
		
			InsulationExtruded PVC, 20 mils minimum average thickness, 18 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseIn Electrically Heated Blankets where exposed to temperatures not exceeding 75 deg C.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 1155	Issued:1959-05-01
			Revised:2012-01-11


Rating	75 deg C, 125 Vac, Horizontal flame.

Conductor	Nominal 5 mils resistance wire. Shall be flattened and then wound spirally for a minimum of 60 turns per inch on a Polyester, Nylon, Fiberglass, Cotton or Rayon yarn core.

Insulation	Extruded PVC, 20 mils minimum average thickness, 18 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	In Electrically Heated Blankets where exposed to temperatures not exceeding 75 deg C.