UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            11574
                        
                            Issued:2014-10-24
                    
                            Revised:New
                    
                            Style
                            11574
                        
                            Single conductor wire using non-integral jacket.
                    
			Rating80 deg C, 30 Vac, Horizontal flame.
		
			Conductor50 AWG - 30 AWG, solid or stranded.
		
			InsulationExtruded PFA which consists of two concentric tubes with integral bridges to maintain air gap between tubes, overall thickness - 1.5 mils min average and 1.3 mils min at any point, inner tube thickness - 0.32 mils min at any point, outer tube thickness - 0.58 mils min at any point, and inter bridge thickness - 0.81 mils min at any point.
		
			ShieldRequired.
		
			JacketExtruded PFA, 0.5 mils minimum average thickness, 0.4 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024


Rating	80 deg C, 30 Vac, Horizontal flame.

Conductor	50 AWG - 30 AWG, solid or stranded.

Insulation	Extruded PFA which consists of two concentric tubes with integral bridges to maintain air gap between tubes, overall thickness - 1.5 mils min average and 1.3 mils min at any point, inner tube thickness - 0.32 mils min at any point, outer tube thickness - 0.58 mils min at any point, and inter bridge thickness - 0.81 mils min at any point.

Shield	Required.

Jacket	Extruded PFA, 0.5 mils minimum average thickness, 0.4 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.