UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            11587
                        
                            Issued:2014-11-21
                    
                            Revised:2014-11-23
                    
                            Style
                            11587
                        
                            Single Conductor with Extruded Insulation and Extruded Non-Integral Covering.
                    
			Rating75 deg C Dry, 600 VAC; Moisture Res 75 (required).
		
			Conductor50 AWG - 10 AWG, solid or stranded.
		
			InsulationExtruded PVC, 15 mils minimum average thickness, 13 mils minimum thickness at any point; PVC is R/C QMTT2 UL Recognized for Wire Type THWN (75C Dry and 75C Wet).
		
			CoveringExtruded Nylon, 4 mils minimum thickness at any point and 6 mils maximum average thickness.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 11587	Issued:2014-11-21
			Revised:2014-11-23


Rating	75 deg C Dry, 600 VAC; Moisture Res 75 (required).

Conductor	50 AWG - 10 AWG, solid or stranded.

Insulation	Extruded PVC, 15 mils minimum average thickness, 13 mils minimum thickness at any point; PVC is R/C QMTT2 UL Recognized for Wire Type THWN (75C Dry and 75C Wet).

Covering	Extruded Nylon, 4 mils minimum thickness at any point and 6 mils maximum average thickness.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.