UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            11596
                        
                            Issued:2015-01-07
                    
                            Revised:New
                    
                            Style
                            11596
                        
                            Single conductor with extruded insulation and other-than-extruded covering
                    
			Rating90 deg C, 30 Vac, Horizontal flame.
		
			Conductor50 AWG - 30 AWG, solid or stranded.
		
			InsulationExtruded PFA, 1.5 mil minimum average thickness, 1.3 mil minimum thickness at any point.
		
			Inner CoveringPET tape with polyester adhesive, 0.3 mil minimum combined thickness of all layers of tape and adhesive, spirally wrapped and heat sealed.
		
			Outer CoveringAL/PET or CU/PET tape with polyester adhesives, 0.6 mil minimum combined thickness of all layers of tape and adhesives, spirally wrapped and heat sealed. AL or CU layer in AL/PET or CU/PET tape shall be exposed as outermost layer.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025


Rating	90 deg C, 30 Vac, Horizontal flame.

Conductor	50 AWG - 30 AWG, solid or stranded.

Insulation	Extruded PFA, 1.5 mil minimum average thickness, 1.3 mil minimum thickness at any point.

Inner Covering	PET tape with polyester adhesive, 0.3 mil minimum combined thickness of all layers of tape and adhesive, spirally wrapped and heat sealed.

Outer Covering	AL/PET or CU/PET tape with polyester adhesives, 0.6 mil minimum combined thickness of all layers of tape and adhesives, spirally wrapped and heat sealed. AL or CU layer in AL/PET or CU/PET tape shall be exposed as outermost layer.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.