UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            11680
                        
                            Issued:2017-02-08
                    
                            Revised:New
                    
                            Style
                            11680
                        
                            Single conductor with extruded insulation and extruded non-integral jacket
                    
			Rating80 deg C,600 Vac, Horizontal flame and VW-1 flame.
		
			Conductor50 AWG - 1 AWG, solid or stranded.
		
			InsulationExtruded PE insulation with minimum average thickness 10 mils, minimum thickness at any point 9 mils.
		
			AssemblyOne insulated single conductor employing PE insulation, inner metal braid over the insulation, optional binder, optional inner PE jacket, 2 metal braids and overall jacket.
		
			Inner ShieldRequired.  A metal braid shall be provided over the insulation.
		
			Inner JacketOptional. An extruded PE jacket may be provided over the inner shield and under the middle shield.  Thickness not specified.
		
			Middle ShieldRequired.  A metal braid shall be provided over the inner jacket and under the outer shield.
		
			Outer ShieldRequired.  A metal braid shall be provided under the overall jacket.
		
			JacketExtruded TPU with 28 mils minimum average thickness, 22 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseSpecial - Internal Wiring with required VW-1 flame rating.
		
                UL and the UL Logo are trademarks of UL LLC © 2025


Rating	80 deg C,600 Vac, Horizontal flame and VW-1 flame.

Conductor	50 AWG - 1 AWG, solid or stranded.

Insulation	Extruded PE insulation with minimum average thickness 10 mils, minimum thickness at any point 9 mils.

Assembly	One insulated single conductor employing PE insulation, inner metal braid over the insulation, optional binder, optional inner PE jacket, 2 metal braids and overall jacket.

Inner Shield	Required. A metal braid shall be provided over the insulation.

Inner Jacket	Optional. An extruded PE jacket may be provided over the inner shield and under the middle shield. Thickness not specified.

Middle Shield	Required. A metal braid shall be provided over the inner jacket and under the outer shield.

Outer Shield	Required. A metal braid shall be provided under the overall jacket.

Jacket	Extruded TPU with 28 mils minimum average thickness, 22 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Special - Internal Wiring with required VW-1 flame rating.