UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            11702
                        
                            Issued:2017-05-08
                    
                            Revised:2018-04-04
                    
                            Style
                            11702
                        
                            Single Conductor with Extruded Insulation
                    
			Rating150 deg C,1000 Vac Horizontal flame.
		
			Conductor50 AWG - 2 AWG, solid or stranded,solid magnet wire or Litz cable magnet wire, R/C (OBMW2), magnet wire.  Each single magnet wire strand is cabled together with other magnet wire strands to form a conductor.
		
			InsulationExtruded FEP or PFA.  May be extruded in one layer with 9 mils minimum average thickness, 8 mils minimum thickness at any point. May be extruded in two layers, each layer with 4.5 mils minimum average thickness or in three layers, each layer with 3 mils minimum average thickness.
		
			ShieldOptional.
		
			CoveringOptional. Extruded FEP or PFA, 5 mils minimum thickness or PTFE (extruded or tape wrapped) 5 mils minimum thickness, or thicker.
		
			BraidOptional. Silicone impregnated glass braid, 15 mils minimum thickness.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral. For Litz conductors shall be marked as follows: "Litz conductors are manufactured using solderable magnet wire."
		
			UseInternal Wiring of Appliances. In addition the tag may also indicate the following: 1000 V Peak for electronic use only. Wires employing Litz conductors shall be plainly marked on the tag or reel as follows: "Litz conductors are manufactured using solderable magnet wire."
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 1	Page 11702	Issued:2017-05-08
			Revised:2018-04-04


Rating	150 deg C,1000 Vac Horizontal flame.

Conductor	50 AWG - 2 AWG, solid or stranded,solid magnet wire or Litz cable magnet wire, R/C (OBMW2), magnet wire. Each single magnet wire strand is cabled together with other magnet wire strands to form a conductor.

Insulation	Extruded FEP or PFA. May be extruded in one layer with 9 mils minimum average thickness, 8 mils minimum thickness at any point. May be extruded in two layers, each layer with 4.5 mils minimum average thickness or in three layers, each layer with 3 mils minimum average thickness.

Shield	Optional.

Covering	Optional. Extruded FEP or PFA, 5 mils minimum thickness or PTFE (extruded or tape wrapped) 5 mils minimum thickness, or thicker.

Braid	Optional. Silicone impregnated glass braid, 15 mils minimum thickness.

Standard	Appliance Wiring Material UL 758.

Marking	General. For Litz conductors shall be marked as follows: "Litz conductors are manufactured using solderable magnet wire."

Use	Internal Wiring of Appliances. In addition the tag may also indicate the following: 1000 V Peak for electronic use only. Wires employing Litz conductors shall be plainly marked on the tag or reel as follows: "Litz conductors are manufactured using solderable magnet wire."