UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            11736
                        
                            Issued:2017-12-28
                    
                            Revised:2017-12-27
                    
                            Style
                            11736
                        
                            Single conductor cable using non-integral jacket.
                    
			Rating200 deg C,90 Vac, Horizontal flame.
		
			Conductor36 AWG - 16 AWG, solid or stranded.
		
			InsulationExtruded non-separable two layers PFA. Each layer consists of an inner tube and an outer tube joined together by webs.
Inner layer - Overall 2.0 mils minimum average thickness and 1.8 mils minimum at any point, including air gap between the tubes. Individual tube and web 1.0 mil minimum at any point.
Outer layer - Overall 5 mils minimum average thickness and 4 mils minimum at any point, including air gap between the tubes. Individual tube and web 1.1 mils minimum at any point.
		
			ShieldOptional
		
			JacketExtruded FEP, 2.0 mils minimum average thickness, 1.6 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 11736	Issued:2017-12-28
			Revised:2017-12-27


Rating	200 deg C,90 Vac, Horizontal flame.

Conductor	36 AWG - 16 AWG, solid or stranded.

Insulation	Extruded non-separable two layers PFA. Each layer consists of an inner tube and an outer tube joined together by webs. Inner layer - Overall 2.0 mils minimum average thickness and 1.8 mils minimum at any point, including air gap between the tubes. Individual tube and web 1.0 mil minimum at any point. Outer layer - Overall 5 mils minimum average thickness and 4 mils minimum at any point, including air gap between the tubes. Individual tube and web 1.1 mils minimum at any point.

Shield	Optional

Jacket	Extruded FEP, 2.0 mils minimum average thickness, 1.6 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.