UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1175
                        
                            Issued:1959-05-01
                    
                            Revised:2012-06-29
                    
                            Style
                            1175
                        
                            Single conductor with extruded insulation.
                    
			Rating80 deg C, 300 Vac, Horizontal flame.
		
			ConductorMinimum 0.0015 inch diameter resistance wire wound for a minimum of 20 turns per inch on a Rayon, Cotton, Polyester, Fiberglass or Nylon yarn core.
		
			InsulationExtruded PVC, 30 mils min average thickness, 27 mils minimum thickness at any point.
		
			CoveringExtruded nylon in 2-mil minimum thickness.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring of Refrigeration Equipment to prevent condensation of moisture on the outside of the freezer cabinet and where exposed to temperatures not exceeding 80 deg C.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 1175	Issued:1959-05-01
			Revised:2012-06-29


Rating	80 deg C, 300 Vac, Horizontal flame.

Conductor	Minimum 0.0015 inch diameter resistance wire wound for a minimum of 20 turns per inch on a Rayon, Cotton, Polyester, Fiberglass or Nylon yarn core.

Insulation	Extruded PVC, 30 mils min average thickness, 27 mils minimum thickness at any point.

Covering	Extruded nylon in 2-mil minimum thickness.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring of Refrigeration Equipment to prevent condensation of moisture on the outside of the freezer cabinet and where exposed to temperatures not exceeding 80 deg C.