UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            11763
                        
                            Issued:2018-10-30
                    
                            Revised:New
                    
                            Style
                            11763
                        
                            Single Conductor with Extruded Non-Integral Jacket
                    
			Rating80 deg C,150 Vac Cable flame, VW-1 flame.
		
			Insulated ConductorLabeled or complying with manufacturer's AWM Procedure.
		
			ShieldOptional
		
			CoveringOptional for one layer jacket.  None for two layers jacket.
		
			JacketExtruded PVC. One layer or two layers jacket, thickness in accordance with the table below.  Two layers jacket are extruded simultaneously and not separable in the same base compound, but should be differed with color.  The thickness of individual layer is not specified.  One layer jacket thickness (mils) or two layers total thickness (mils)
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0-2.500 inch15 mils12 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection of Class 2 circuits
		
                UL and the UL Logo are trademarks of UL LLC © 2024


Rating	80 deg C,150 Vac Cable flame, VW-1 flame.

Insulated Conductor	Labeled or complying with manufacturer's AWM Procedure.

Shield	Optional

Covering	Optional for one layer jacket. None for two layers jacket.

Jacket	Extruded PVC. One layer or two layers jacket, thickness in accordance with the table below. Two layers jacket are extruded simultaneously and not separable in the same base compound, but should be differed with color. The thickness of individual layer is not specified. One layer jacket thickness (mils) or two layers total thickness (mils)
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0-2.500 inch	15 mils	12 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection of Class 2 circuits