UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1179
                        
                            Issued:1959-05-01
                    
                            Revised:2011-08-16
                    
                            Style
                            1179
                        
                            Single conductor with extruded insulation.
                    
			Rating90 deg C, 250 Vac, Horizontal flame.
		
			ConductorNickel-silver, copper alloy, or copper resistance wire. Size varies dependent upon wattage demand.
		
			InsulationSRPVC, 28 mils min average, 25 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral. The conductor alloy designation shall be included. Ohms per foot rating at 68 deg F (optional marking).
		
			UseThermoplastic Insulated Resistance Wire for Heating Cable Units where exposed to temperatures not exceeding 90 deg C. The conductor alloy designation shall be included. Ohms per foot rating at 68 deg F (optional marking).
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 1179	Issued:1959-05-01
			Revised:2011-08-16


Rating	90 deg C, 250 Vac, Horizontal flame.

Conductor	Nickel-silver, copper alloy, or copper resistance wire. Size varies dependent upon wattage demand.

Insulation	SRPVC, 28 mils min average, 25 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General. The conductor alloy designation shall be included. Ohms per foot rating at 68 deg F (optional marking).

Use	Thermoplastic Insulated Resistance Wire for Heating Cable Units where exposed to temperatures not exceeding 90 deg C. The conductor alloy designation shall be included. Ohms per foot rating at 68 deg F (optional marking).