UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            11790
                        
                            Issued:2019-01-10
                    
                            Revised:2019-07-16
                    
                            Style
                            11790
                        
                            Single conductor with extruded insulation
                    
			Rating105 deg C, 1000 Vac, Horizontal flame.
		
			Conductor50 AWG - 4/0 AWG -  Bare or metal coated copper conductor;  or Litz cable magnet wire. A magnet wire conductor shall consist of a single strand Recognized Component - Magnet Wire (OBMW2) or an assembly of these individually enameled wires, which may be assembled or twisted together with an overall covering of film fiber, tape, or extruded compound to form a Litz wire. The minimum rating shall be 105 deg C. AWG size to be determined by the DC Resistance Test per UL 1581
		
			InsulationExtruded TPE with minimum average thickness 33 mils, minimum thickness at any point 30 mils.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 1	Page 11790	Issued:2019-01-10
			Revised:2019-07-16


Rating	105 deg C, 1000 Vac, Horizontal flame.

Conductor	50 AWG - 4/0 AWG - Bare or metal coated copper conductor; or Litz cable magnet wire. A magnet wire conductor shall consist of a single strand Recognized Component - Magnet Wire (OBMW2) or an assembly of these individually enameled wires, which may be assembled or twisted together with an overall covering of film fiber, tape, or extruded compound to form a Litz wire. The minimum rating shall be 105 deg C. AWG size to be determined by the DC Resistance Test per UL 1581

Insulation	Extruded TPE with minimum average thickness 33 mils, minimum thickness at any point 30 mils.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.