UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1181
                        
                            Issued:1959-05-01
                    
                            Revised:2011-07-21
                    
                            Style
                            1181
                        
                            Single Conductor with Extruded Insulation
                    
			Rating60 deg C, 600 Vac, Horizontal flame, 60 deg C Oil, Gasoline Resistant
		
			Conductor18 AWG - 16 AWG solid or stranded round
		
			InsulationExtruded PVC, 30 mils minimum average, 27 mils minimum thickness at any point.
		
			CoveringExtruded Nylon, 5 mils minimum average thickness, 4 mils minimum thickness at any point
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseAt temperatures not exceeding 60 deg C in air, or where exposed to mineral oil or gasoline vapors; or ordinary ambient temperatures where exposed to gasoline. Surface Marking: All wire of this type shall have "Gasoline-Resistant" or "Gasoline and Oil Resistant" printed in ink on the surface of the insulation at intervals not greater than six inches.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 1181	Issued:1959-05-01
			Revised:2011-07-21


Rating	60 deg C, 600 Vac, Horizontal flame, 60 deg C Oil, Gasoline Resistant

Conductor	18 AWG - 16 AWG solid or stranded round

Insulation	Extruded PVC, 30 mils minimum average, 27 mils minimum thickness at any point.

Covering	Extruded Nylon, 5 mils minimum average thickness, 4 mils minimum thickness at any point

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	At temperatures not exceeding 60 deg C in air, or where exposed to mineral oil or gasoline vapors; or ordinary ambient temperatures where exposed to gasoline. Surface Marking: All wire of this type shall have "Gasoline-Resistant" or "Gasoline and Oil Resistant" printed in ink on the surface of the insulation at intervals not greater than six inches.