UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1182
                        
                            Issued:1959-05-01
                    
                            Revised:2012-04-27
                    
                            Style
                            1182
                        
                            Single-conductor cable using other-than extruded covering.
                    
			Rating60 deg C, 120 Vac, Horizontal flame.
		
			InsulationLabelled 14 AWG or 12 AWG, solid, same as for Type TW wire. The insulation shall be yellow in color to indicate 120 volt rating.
		
			Paper WrapFormed of four pieces of moisture resistant crepe type Kraft paper, 1 by 0.005 inches, or 1-1/2 by 0.003 inches, applied in a manner as to provide 5 thickness of paper over the Labelled same as for Type TW conductor with an approximate 3/16 inhes overlap between pieces.
		
			CoveringGlass or combination Cotton-Glass braid saturated with a flame-retardant and moisture-resistant impregnant.
		
			Over-All FinishOptional. The outer covering may be finished with an aluminum paint or white paint.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseOnly as factory assembled Non-Heating Leads on Radiant Heating Cable Units.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 1182	Issued:1959-05-01
			Revised:2012-04-27


Rating	60 deg C, 120 Vac, Horizontal flame.

Insulation	Labelled 14 AWG or 12 AWG, solid, same as for Type TW wire. The insulation shall be yellow in color to indicate 120 volt rating.

Paper Wrap	Formed of four pieces of moisture resistant crepe type Kraft paper, 1 by 0.005 inches, or 1-1/2 by 0.003 inches, applied in a manner as to provide 5 thickness of paper over the Labelled same as for Type TW conductor with an approximate 3/16 inhes overlap between pieces.

Covering	Glass or combination Cotton-Glass braid saturated with a flame-retardant and moisture-resistant impregnant.

Over-All Finish	Optional. The outer covering may be finished with an aluminum paint or white paint.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Only as factory assembled Non-Heating Leads on Radiant Heating Cable Units.