UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            11827
                        
                            Issued:2019-09-23
                    
                            Revised:2019-09-26
                    
                            Style
                            11827
                        
                            Single conductor with extruded insulation and extruded non-integral jacket
                    
			Rating80 deg C,300 Vac Horizontal flame.
		
			Conductor50 AWG - 4/0 AWG, solid or stranded.
		
			InsulationExtruded PE, 12 mils minimum average thickness, 10 mils minimum thickness at any point.
		
			Conductive CoatingOptional.  May be provided over the insulation and/or over the inner jacket.
		
			AssemblySingle conductor employing PE insulation, optional conductive coating, optional inner shield, optional inner jacket, optional conductive coating, required outer shield and overall PVC jacket.
		
			Inner ShieldOptional.
		
			Inner JacketOptional, thickness not specified.
		
			Conductive CoatingOptional, provided over the inner jacket.
		
			Outer ShieldMetal braid, serve or metal tape with or without a drain wire, shall be provided under the overall jacket.
		
			Outer JacketExtruded PVC, 12 mils minimum average thickness, 10 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 1	Page 11827	Issued:2019-09-23
			Revised:2019-09-26


Rating	80 deg C,300 Vac Horizontal flame.

Conductor	50 AWG - 4/0 AWG, solid or stranded.

Insulation	Extruded PE, 12 mils minimum average thickness, 10 mils minimum thickness at any point.

Conductive Coating	Optional. May be provided over the insulation and/or over the inner jacket.

Assembly	Single conductor employing PE insulation, optional conductive coating, optional inner shield, optional inner jacket, optional conductive coating, required outer shield and overall PVC jacket.

Inner Shield	Optional.

Inner Jacket	Optional, thickness not specified.

Conductive Coating	Optional, provided over the inner jacket.

Outer Shield	Metal braid, serve or metal tape with or without a drain wire, shall be provided under the overall jacket.

Outer Jacket	Extruded PVC, 12 mils minimum average thickness, 10 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.