UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1183
                        
                            Issued:1959-05-01
                    
                            Revised:2012-04-25
                    
                            Style
                            1183
                        
                            Single Conductor with Extruded Insulation and Non-extruded Covering
                    
			Rating60 deg C, 240 Vac, FT1 flame, 60 deg C Wet.
		
			InsulationLabelled 14 or 12 AWG, solid, suitable for Type TW wire. The insulation shall be red in color to indicate 240 volt rating.
		
			Paper WrapFormed of four pieces of moisture resistant crepe type Kraft paper, 1 by 0.005 inch, or 1-1/2 by 0.003 inch, applied in a manner as to provide 5 thickness of paper over the labelled suitable for Type TW conductor with an approximate 3/16 in. overlap between pieces.
		
			Outer CoveringCotton, glass or combination cotton-glass braid saturated with a flame-retardant and moisture-resistant impregnant.
		
			Overall FinishOptional. The outer covering may be finished with an aluminum paint or white paint.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseOnly as factory assembled Non-Heating Leads on Radiant Heating Cable Units.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 1183	Issued:1959-05-01
			Revised:2012-04-25


Rating	60 deg C, 240 Vac, FT1 flame, 60 deg C Wet.

Insulation	Labelled 14 or 12 AWG, solid, suitable for Type TW wire. The insulation shall be red in color to indicate 240 volt rating.

Paper Wrap	Formed of four pieces of moisture resistant crepe type Kraft paper, 1 by 0.005 inch, or 1-1/2 by 0.003 inch, applied in a manner as to provide 5 thickness of paper over the labelled suitable for Type TW conductor with an approximate 3/16 in. overlap between pieces.

Outer Covering	Cotton, glass or combination cotton-glass braid saturated with a flame-retardant and moisture-resistant impregnant.

Overall Finish	Optional. The outer covering may be finished with an aluminum paint or white paint.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Only as factory assembled Non-Heating Leads on Radiant Heating Cable Units.