UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            11837
                        
                            Issued:2019-10-29
                    
                            Revised:2019-10-31
                    
                            Style
                            11837
                        
                            Single Conductor with Extruded Insulation and Non-Integral Jacket
                    
			Rating105 deg C,600 Vac Cable flame.
		
			Conductor44 AWG - 10 AWG, solid or stranded, coated.
		
			InsulationExtruded PVC core, 26 mils minimum average thickness, 22 mils minimum thickness at any point.
		
			AssemblySingle conductor, with PVC insulation core with outer windings of R/C magnet wire (OBMW2), 2 or more layers, alternating direction of lay, covered by a shield, drain wire and non-integral jacket.
		
			ShieldOptional
		
			Drain WireOptional
		
			JacketExtruded TPU
		
			Diameter of core assembly under jacket (inches)Minimum average thickness (mils)Minimum thickness at any point (mils)
		
			0.700 or less3024
		
			0.701-1.0004536
		
			1.001-1.5006048
		
			1.501-2.5008064
		
			2.501-4.00011088
		
			4.001 and larger140112
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 1	Page 11837	Issued:2019-10-29
			Revised:2019-10-31


Rating	105 deg C,600 Vac Cable flame.

Conductor	44 AWG - 10 AWG, solid or stranded, coated.

Insulation	Extruded PVC core, 26 mils minimum average thickness, 22 mils minimum thickness at any point.

Assembly	Single conductor, with PVC insulation core with outer windings of R/C magnet wire (OBMW2), 2 or more layers, alternating direction of lay, covered by a shield, drain wire and non-integral jacket.

Shield	Optional

Drain Wire	Optional

Jacket	Extruded TPU
	Diameter of core assembly under jacket (inches)	Minimum average thickness (mils)	Minimum thickness at any point (mils)
	0.700 or less	30	24
	0.701-1.000	45	36
	1.001-1.500	60	48
	1.501-2.500	80	64
	2.501-4.000	110	88
	4.001 and larger	140	112

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring.