UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            11853
                        
                            Issued:2020-01-15
                    
                            Revised:2020-01-16
                    
                            Style
                            11853
                        
                            Single conductor with extruded insulation
                    
			Rating80 deg C,600 Vac.
		
			Conductor44 AWG - 1/0 AWG, solid or stranded or R/C Magnet Wire (OBMW2) enameled single magnet wire or assembly of magnet wire strands cabled or braided together to form a conductor. The AWG size to be determined by the DC Resistance Test.
		
			InsulationExtruded TPES, 9 mils minimum average thickness, 8 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor Further Processing into Cables. If Magnet Wire is employed, the words, "Magnet Wire Conductor" shall be marked and the size of the magnet wire conductor shall be identified by its maximum DC resistance at a particular temperature (Example: Maximum__________ohm/feet at ______________C).
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 1	Page 11853	Issued:2020-01-15
			Revised:2020-01-16


Rating	80 deg C,600 Vac.

Conductor	44 AWG - 1/0 AWG, solid or stranded or R/C Magnet Wire (OBMW2) enameled single magnet wire or assembly of magnet wire strands cabled or braided together to form a conductor. The AWG size to be determined by the DC Resistance Test.

Insulation	Extruded TPES, 9 mils minimum average thickness, 8 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For Further Processing into Cables. If Magnet Wire is employed, the words, "Magnet Wire Conductor" shall be marked and the size of the magnet wire conductor shall be identified by its maximum DC resistance at a particular temperature (Example: Maximum__________ohm/feet at ______________C).