UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            11872
                        
                            Issued:2020-07-10
                    
                            Revised:New
                    
                            Style
                            11872
                        
                            Single conductor with extruded insulation and non-extruded covering.
                    
			Rating105 deg C, 90 Vac, Horizontal flame.
		
			Conductor36 AWG - 16 AWG, solid or stranded.
		
			InsulationExtruded PFA consists of two concentric tubes with integral bridges to maintain air gap between tubes, overall thickness - 7 mils minimum average thickness and 6 mils minimum at any point, inner tube thickness - 1 mil minimum at any point, outer tube thickness - 1 mil minimum at any point, and inter bridge thickness - 1 mil minimum at any point.
		
			ShieldOptional.
		
			CoveringPETP tape with polyester adhesive, combination thickness of tape and adhesive 0.3 mils minimum, 20 percent minimum overlap, spirally wrapped.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring where not subject to mechanical abuse or movement.
		
                UL and the UL Logo are trademarks of UL LLC © 2024


Rating	105 deg C, 90 Vac, Horizontal flame.

Conductor	36 AWG - 16 AWG, solid or stranded.

Insulation	Extruded PFA consists of two concentric tubes with integral bridges to maintain air gap between tubes, overall thickness - 7 mils minimum average thickness and 6 mils minimum at any point, inner tube thickness - 1 mil minimum at any point, outer tube thickness - 1 mil minimum at any point, and inter bridge thickness - 1 mil minimum at any point.

Shield	Optional.

Covering	PETP tape with polyester adhesive, combination thickness of tape and adhesive 0.3 mils minimum, 20 percent minimum overlap, spirally wrapped.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring where not subject to mechanical abuse or movement.