UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            11915
                        
                            Issued:2021-03-22
                    
                            Revised:2021-03-19
                    
                            Style
                            11915
                        
                            Single Conductor with extruded non-integral jacket
                    
			Rating80 deg C,30 V Horizontal flame, Cable Flame.
		
			Conductor36 AWG min., solid or stranded.
		
			InsulationLabeled or complying with AWM Procedure
		
			AssemblyInsulated conductor with optional inner covering, with optional inner/outer shield and required outer Jacket.  Barrier layer and/or fillers optional.  Manufacturer shall maintain a complete description of each assembly.
		
			Inner ShieldOptional.
		
			Inner CoveringOptional.
		
			Outer ShieldOptional.
		
			JacketExtruded TPE
		
			Diameter of core assembly under jacketMinimum avereage thicknessMinimum thickness at any point
		
			0.00-1.500 inch13 mils10 mils
		
			1.501-2.500 inch15 mils12 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection cable for use in Class 2 circuits of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 1	Page 11915	Issued:2021-03-22
			Revised:2021-03-19


Rating	80 deg C,30 V Horizontal flame, Cable Flame.

Conductor	36 AWG min., solid or stranded.

Insulation	Labeled or complying with AWM Procedure

Assembly	Insulated conductor with optional inner covering, with optional inner/outer shield and required outer Jacket. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.

Inner Shield	Optional.

Inner Covering	Optional.

Outer Shield	Optional.

Jacket	Extruded TPE
	Diameter of core assembly under jacket	Minimum avereage thickness	Minimum thickness at any point
	0.00-1.500 inch	13 mils	10 mils
	1.501-2.500 inch	15 mils	12 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection cable for use in Class 2 circuits of electronic equipment.