UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            11937
                        
                            Issued:2021-06-07
                    
                            Revised:2021-10-14
                    
                            Style
                            11937
                        
                            Single Conductor with Extruded Insualtion
                    
			Rating90 deg C, 1000 Vac.
		
			Conductor36 AWG - 2000 kcmil, Litz cable magnet wire. A magnet wire conductor shall consist of a single strand Recognized Component - Magnet Wire (OBMW2) or an assembly of these individually enameled wires, which may be assembled or twisted together with an overall covering of film fiber, tape, or extruded compound to form a Litz wire. The minimum rating shall be 90 deg C. AWG size to be determined by the DC Resistance Test.
		
			InsulationExtruded PP
		
			Conductor Sizemils min averagemils min at any point
		
			36-20 AWG8 avg7 min
		
			19-16 AWG10 avg9 min
		
			15-10 AWG12 avg10 min
		
			9-6 AWG18 avg16 min
		
			5-2 AWG24 avg21 min
		
			1-4/0 AWG29 avg26 min
		
			250-500 kcmil41 avg37 min
		
			501-1000 kcmil54 avg48 min
		
			1001-2000 kcmil75 avg67 min
		
			(See Facing Page for compound.)
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral. If the Magnet Wire is employed, the words, "Magnet Wire Conductor" shall be marked and the size of the magnet wire conductor shall be identified by its maximum DC resistance at a particular temperature (Example: Maximum____________ohm/feet at ______________C)
		
			UseFor Further Processing into Cables.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 11937	Issued:2021-06-07
			Revised:2021-10-14


Rating	90 deg C, 1000 Vac.

Conductor	36 AWG - 2000 kcmil, Litz cable magnet wire. A magnet wire conductor shall consist of a single strand Recognized Component - Magnet Wire (OBMW2) or an assembly of these individually enameled wires, which may be assembled or twisted together with an overall covering of film fiber, tape, or extruded compound to form a Litz wire. The minimum rating shall be 90 deg C. AWG size to be determined by the DC Resistance Test.

Insulation	Extruded PP
	Conductor Size	mils min average	mils min at any point
	36-20 AWG	8 avg	7 min
	19-16 AWG	10 avg	9 min
	15-10 AWG	12 avg	10 min
	9-6 AWG	18 avg	16 min
	5-2 AWG	24 avg	21 min
	1-4/0 AWG	29 avg	26 min
	250-500 kcmil	41 avg	37 min
	501-1000 kcmil	54 avg	48 min
	1001-2000 kcmil	75 avg	67 min
	(See Facing Page for compound.)

Standard	Appliance Wiring Material UL 758.

Marking	General. If the Magnet Wire is employed, the words, "Magnet Wire Conductor" shall be marked and the size of the magnet wire conductor shall be identified by its maximum DC resistance at a particular temperature (Example: Maximum____________ohm/feet at ______________C)

Use	For Further Processing into Cables.