UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1194
                        
                            Issued:1959-06-30
                    
                            Revised:2012-11-30
                    
                            Style
                            1194
                        
                            Single Conductor Cable with Extruded Non-Integral Covering
                    
			Rating90 deg C, 250 Vac, Horizontal flame.
		
			ConductorNickel alloy or nickel-chrome alloy, size varies dependent upon wattage demand.
		
			InsulationExtruded PVC, 31 mils minimum average thickness, 28 mils minimum thickness at any point.
		
			CoveringExtruded Nylon, 3 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			Use"Thermoplastic Insulated Resistance Wire for Heating Cable Units where exposed to temperatures not Exceeding 90 deg C." The conductor alloy designation shall be included. Ohms per foot rating (optional marking).
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 1194	Issued:1959-06-30
			Revised:2012-11-30


Rating	90 deg C, 250 Vac, Horizontal flame.

Conductor	Nickel alloy or nickel-chrome alloy, size varies dependent upon wattage demand.

Insulation	Extruded PVC, 31 mils minimum average thickness, 28 mils minimum thickness at any point.

Covering	Extruded Nylon, 3 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	"Thermoplastic Insulated Resistance Wire for Heating Cable Units where exposed to temperatures not Exceeding 90 deg C." The conductor alloy designation shall be included. Ohms per foot rating (optional marking).