UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            11963
                        
                            Issued:2021-01-26
                    
                            Revised:2021-10-26
                    
                            Style
                            11963
                        
                            Single Conductor using Non-Integral Non-Extruded Jacket.
                    
			Rating200 deg C, no voltage specified, Horizontal flame.
		
			Insulated ConductorLabeled or complying with manufacturer's AWM Procedure.
		
			SeparatorOptional, non-extruded Foamed PTFE or non-extruded PTFE.
		
			ShieldOptional.
		
			JacketNon-extruded Tape wrapped PTFE, 6 mils minimum average thickness, 4 mils minimum thickness at any point
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 1	Page 11963	Issued:2021-01-26
			Revised:2021-10-26


Rating	200 deg C, no voltage specified, Horizontal flame.

Insulated Conductor	Labeled or complying with manufacturer's AWM Procedure.

Separator	Optional, non-extruded Foamed PTFE or non-extruded PTFE.

Shield	Optional.

Jacket	Non-extruded Tape wrapped PTFE, 6 mils minimum average thickness, 4 mils minimum thickness at any point

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.