UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            12027
                        
                            Issued:2022-10-31
                    
                            Revised:2022-10-28
                    
                            Style
                            12027
                        
                            Single conductor cable employing a non-extruded covering as the outermost layer
                    
			Rating90 deg C,125 Vac Horizontal flame.
		
			Conductor50 AWG min., solid or stranded.
		
			InsulationExtruded FEP 2 mils minimum average thickness, 1 mil thickness at any point
		
			ShieldOptional
		
			CoveringSpirally wrapped PET film with polyester adhesive, 0.2 mils minimum average total thickness of the tape layers, 0.1 mil minimum total thickness of the tape layers at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 1	Page 12027	Issued:2022-10-31
			Revised:2022-10-28


Rating	90 deg C,125 Vac Horizontal flame.

Conductor	50 AWG min., solid or stranded.

Insulation	Extruded FEP 2 mils minimum average thickness, 1 mil thickness at any point

Shield	Optional

Covering	Spirally wrapped PET film with polyester adhesive, 0.2 mils minimum average total thickness of the tape layers, 0.1 mil minimum total thickness of the tape layers at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.