UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1203
                        
                            Issued:1959-08-14
                    
                            Revised:2011-07-28
                    
                            Style
                            1203
                        
                            Single Conductor with extruded insulation
                    
			Rating90 deg C, 300 Vac, Horizontal flame.
		
			ConductorMinimum 1.75 mils diameter resistance wire wound for a minimum of 25 turns per inch on a Rayon, Cotton, Polyester, Fiberglass or Nylon yarn core.
		
			InsulationPVC, 60 mils min average, 54 mils minimum at any point.
		
			CoveringExtruded nylon with 2-mil minimum thickness.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor refrigerator heating at temperatures not exceeding 90 deg C and in dry location where not subjected to repeated flexing in use.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 1203	Issued:1959-08-14
			Revised:2011-07-28


Rating	90 deg C, 300 Vac, Horizontal flame.

Conductor	Minimum 1.75 mils diameter resistance wire wound for a minimum of 25 turns per inch on a Rayon, Cotton, Polyester, Fiberglass or Nylon yarn core.

Insulation	PVC, 60 mils min average, 54 mils minimum at any point.

Covering	Extruded nylon with 2-mil minimum thickness.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For refrigerator heating at temperatures not exceeding 90 deg C and in dry location where not subjected to repeated flexing in use.