UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            12094
                        
                            Issued:2024-03-25
                    
                            Revised:New
                    
                            Style
                            12094
                        
                            Single conductor with extruded insulation.
                    
			Rating200 deg C, 300 Vac, Horizontal flame.
		
			Conductor50 AWG - 19 AWG, nickel-chromium-alloy, stranded or resistance wire which is one through fifteen laid parallel resistance wire spirally wrapped around a fiberglass core with maximum 0.59 inch interval, core may be coated with silicone rubber. A separator consists of polyimide tape or PTFE tape which is not over 50% overlap may be used between resistance wire and insulation as intended to bind of conductor assembly.
		
			InsulationExtruded PTFE, 18 mils minimum average thickness, 16 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025


Rating	200 deg C, 300 Vac, Horizontal flame.

Conductor	50 AWG - 19 AWG, nickel-chromium-alloy, stranded or resistance wire which is one through fifteen laid parallel resistance wire spirally wrapped around a fiberglass core with maximum 0.59 inch interval, core may be coated with silicone rubber. A separator consists of polyimide tape or PTFE tape which is not over 50% overlap may be used between resistance wire and insulation as intended to bind of conductor assembly.

Insulation	Extruded PTFE, 18 mils minimum average thickness, 16 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.