UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            1
                        
                            Page
                            1222
                        
                            Issued:1996-09-13
                    
                            Revised:2012-03-22
                    
                            Style
                            1222
                        
                            Single or multiple conductor with extruded insulation
                    
			Rating75 deg C, 125 Vac, Horizontal flame.
		
			ConductorA copper alloy or hard drawn copper conductor 6.3 Mils nominal (5.9 Mils minimum) diameter shall be wound spirally for a minimum of 30 turns per inch on a Polyester, Nylon, Fiberglass, Cotton or Rayon yarn core. The diameter over the conductor and core shall be approximately 32 Mils. .
		
			InsulationExtruded PVC, 20 mils min average, 18 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseIn Electrically Heated Blankets where exposed to temperatures not exceeding 75 deg C.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 1	Page 1222	Issued:1996-09-13
			Revised:2012-03-22


Rating	75 deg C, 125 Vac, Horizontal flame.

Conductor	A copper alloy or hard drawn copper conductor 6.3 Mils nominal (5.9 Mils minimum) diameter shall be wound spirally for a minimum of 30 turns per inch on a Polyester, Nylon, Fiberglass, Cotton or Rayon yarn core. The diameter over the conductor and core shall be approximately 32 Mils. .

Insulation	Extruded PVC, 20 mils min average, 18 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	In Electrically Heated Blankets where exposed to temperatures not exceeding 75 deg C.